What problems should be paid attention to when using the angle head side milling head?

What problems should be paid attention to when using the angle head side milling head

The angle head side milling head is an important accessory tool in the machine tool field. It can improve the lack of flexibility of the machine tool in the processing process. The machining requirements of the machine tool are inherently complicated. If the angle head is used together, you must pay attention to this accessory. Precautions for use, because this is directly related to the processing effect of the machine tool. Common considerations include the following:

First, the machine tool can meet the requirements of three-dimensional processing. The realization of this performance is due to the fact that it has three axes of X, Y, and Z, and the flexibility of the angle head must be well matched with these three axes. If it is in a parallel relationship with any of the axes, then the machine tool must have the linkage performance of two axes or more than two axes if it wants to be used normally. If the three axes are not parallel, then there must be more than three axes with linkage function to realize the normal work of the machine tool.

Second, if the angle head wants to have a long service life, it is necessary to pay attention to the test run for a period of time before the official operation of the machine tool. Generally, the time can be controlled within 5 minutes, and the rotation speed is preferably 500 rpm. During the formal operation of the machine tool, sometimes the angle head needs to run at high speed. At this time, the operator must control the time well, because the wear of the angle head is quite serious during high-speed machining. When the angle head is processed, the amount of cutting tools should be reduced as much as possible, the feed rate can be accelerated, and the rotation speed can be increased.

Third, if you want to minimize the probability of failure of the angle head during operation, you must pay attention to the details of the installation process. Although some operators have certain knowledge about installation, they lack professionalism, so if it is the first time If you install it, you must communicate with a professional installer.